Quality sorting company in San Luis Potosí and the Bajío region: part sorting at the customer’s plant or in a warehouse, with our own personnel, on-site supervision, and the criteria the customer approves.
To quote: part number, defect or characteristic to check, quantity, location, and shift.
RIDYS Group is a quality sorting company for the automotive industry. We carry out the sorting of parts at the customer’s plant or in a warehouse, with our own staff, on-site supervision, and the criteria approved by the customer. We are certified to ISO 9001:2015 and registered with REPSE (Mexico’s Registry of Specialized Service Providers).
As a quality sorting company, RIDYS Group serves automotive plants and Tier 1 suppliers in San Luis Potosí and, regularly, in Guanajuato (León, Silao, Irapuato, and Celaya), Querétaro, and Aguascalientes; on request, also in Jalisco and in Saltillo and Ramos Arizpe, Coahuila. The part sorting service includes inspecting the lot against the criteria the customer approves, separating nonconforming parts, identifying released material, and daily reporting of results.
RIDYS Group is a quality sorting company based in San Luis Potosí. We operate from Av. Universidad 1085, in the Azteca Norte neighborhood, minutes from the city's industrial areas.
Among the region’s sorting companies, that proximity is the main reason an SLP customer hires us. When a plant needs containment, it needs it today, not when personnel arrive from another city. We have staff in San Luis Potosí and schedule the start according to the shift and urgency of your requirement.
Request a Quote
We will contact you by email or phone.
By submitting this form, you acknowledge that you have read our Privacy Notice.
This site is protected by reCAPTCHA and the Google Privacy Policy and the Terms of service from Google.
A containment service has three times: the call response time, the on-site start-up time, and the escalation time when the volume increases. All three depend on where the personnel are located.
A provider operating from another state can quote cheaper per hour and still cost more, because the material remains in storage while their people arrive, because the supervisor visits once a week instead of being on duty every shift, and because when it comes to switching from three to ten inspectors overnight, there’s no one to replace them.
We live here. The supervisor is on the floor, not on the phone.
Separation of conforming and nonconforming material in an identified lot, with a traceable verification mark on each inspected part.
View More →Additional 100% inspection at launch or upon a quality alert, maintained until the exit criterion is met.
View More →Verification of received or in-process material against documented criteria.
View More →Recovery of nonconforming material under an approved operation.
View More →Controlled shipping when the OEM imposes it, with direct reporting to the customer.
View More →Engineer assigned to the customer’s plant.
View More →
We serve San Luis Potosí and from here we cover Guanajuato (León, Silao, Irapuato and Celaya), Querétaro and Aguascalientes, with our own transport. Upon request, we also serve Jalisco, Saltillo and Ramos Arizpe (Coahuila). Outside of San Luis Potosí, the pickup is scheduled according to distance, time slot and availability.
Quality management system certified to ISO 9001:2015 and REPSE registration ARR197/2024 with Mexico’s Ministry of Labor (STPS), verifiable in the public registry. Services are contracted without joint liability exposure for the customer.
A quality inspector inspects parts and separates the conformable parts from the non-conformable ones when a confirmed or suspected defect is found, to contain the problem and ensure that only verified parts are sent.
In the event of a complaint or quality alert, a defect detected in-line or in the warehouse, material held back, disruptions or changes in process (GP12) and when the customer requests Controlled Shipping (CS1/CS2). AQL or 100% Inspection?
At the location determined by the customer: their plant, their warehouse, or their customer's plant, in San Luis Potosí and the Bajío region. Other locations are evaluated based on the requirement.
Part number, defect or characteristic to be reviewed, estimated quantity, location, shift and the acceptance criteria, preferably in a work instruction approved by the customer.
The record agreed with the customer: usually part number, lot, shift, OK and NOK parts by failure mode, and hours worked.
Yes: RIDYS Group holds ISO 9001 certification, REPSE registration, and D-U-N-S® number 951604726.
Describe the material, the defect, and the volume, and we will send back a proposal with rate, start-up time, and reporting scheme.
RIDYS Group · Av. Universidad 1085, Azteca Norte, 78310 San Luis Potosí, S.L.P. · Phone: 444 171 4514
